BS-1008D Taxanaha HDMI Digital Zoom Microscope
Hordhac
BS-1008D taxane dhan-in-hal zoom dhijitaalka ah microscope ayaa lagu muujiyay sida soo socota.Waxay leedahay lens zoom joogto ah 8x BS-1008-WXXX-TV050, 1080p HDMI kamarada H1080PA iyo isha iftiinka giraanta LED.
Qaybta H1080PA waxay si toos ah u dhamaystiri kartaa helitaanka fiidiyowga iyo sawirka iyada oo aan kombuyuutar lahayn, iyo moduleka isha iftiinka giraanta LED wuxuu si toos ah ugu xiran yahay moduleka H1080PA iyada oo loo marayo jidhka ugu weyn ee muraayadda zoom-ka ee joogtada ah iyada oo aan loo baahnayn koronto dibadeed.
Jidhka ugu muhiimsan ee BS-1008D
Tilmaamid
Calaamadaha ugu muhiimsan ee BS-1008D waa sida soo socota:
| Qiyaasaha indhaha | |
| Muraayada Soo Dhaweynta | BS-1008-W100-TV050 lens zoom, 0.7X-5.6X kala duwan |
| Fogaanta Shaqada | 37.5mm-160mm (Waxaa lagu go'aamiyay ujeedada kaalmaynta) |
| NA | 0.018-0.092 (oo leh W100, 1x ujeedo caawiye) |
| Qaraarka | 18.6um-3.65um (oo leh W100, 1x ujeedo caawiye) |
| Garoonka | 0.99mm-34.28mm |
| Ujeedo Ikhtiyaar ah | 0.50x, 0.75x, 1.00x, 1.50x, 2.00x (Ikhtiyaar) |
| Ujeedo Kale oo Ikhtiyaar ah | Ujeeddada mikroskoob ee aan dhammaadka lahayn (Labada ujeeddada mikroskoob ee noolaha iyo ujeeddada mikroskoob ee biro-koob ayaa la isticmaali karaa) |
| Cabirka | 188mm x 52mm |
| Interface Bracket | Heerka 50mm |
| Module Kaamirada Dijital ah ee HDMI | |
| HDMI 1080P Camera | H1080PA, oo lagu dhex daray lens zoom |
| Sensor | Sony IMX307(C), 1/2.8"(5.57x3.13), Cabbirka Pixel 2.9x2.9um |
| Dareenka G/Signal Madow/Range firfircoon/SNR | 1300mv oo leh 1/30s/NA/NA/NA |
| FPS / Qaraarka | 60@1920*1080(HDMI) |
| U nuglaansho | 0.01 ~ 1000ms |
| Qaabka wax soo saarka | wax soo saarka HDMI |
| Kaydinta Sawirka | Isticmaal kaarka SD si aad u badbaadiso sawirka la qabtay |
| Software | Isticmaal software-ka ku dhex jira ee XCamView si aad u maamusho kamarada |
| ISP | Lahaanshaha ISP awood leh iyo hawlaha kale ee habaynta ee la xidhiidha |
| Module Iftiin | |
| Iftiinka giraanta LED-ka | Iftiinka giraanta tooska ah ee LED oo leh dhalaal la isku hagaajin karo (Lacag koronto ah oo aan lahayn) |
| Iftiinka Polarization Ring Ring | Iftiinka dabaylaha giraanta tooska ah ee LED oo leh dhalaal la hagaajin karo (Lama laha fiilo koronto), (BS-1008DRPL-NPC) |
| Coaxial Light Module | Module Iftiinka Coaxial LED oo leh dhalaal la hagaajin karo (Fiilo koronto ma leh), (BS-1008CL_NPC) |
| Bixinta Korontada | Koronto isku dhafan, dhib la'aan fiilooyinka korantada, u fiirsashada muunada si xor ah |
| Habka Rakibaadda | Muuji nooca nuugista heerka labaad, ku habboon oo fudud |
| Xakamaynta iftiinka | Iyada oo loo marayo 3-dabac oo isku-habeyn ah giraangiraha ama software GUI, labadaba hardware iyo software waxay hagaajin karaan iftiinka iftiinka si isku mid ah iyada oo aan wax dhib ah lahayn. |
Tilmaamaha indhaha
Isha iftiinka BS-1080D iyo giraanta LED
| Ujeedada Kaaliyaha | Tilmaamid | Lens TV TV050 ee 1/3" Sensor | |
| Hoose | Sare | ||
| W100, 1.0X (80mm WD) | PMAG | 0.35X~2.80X | |
| FOV | 17.14mm | 2.14mm | |
| NA | 0.018 | 0.092 | |
| W050, 0.5X (160mm WD) | PMAG | 0.18X ~ 1.40X | |
| FOV | 34.28mm | 4.28mm | |
| NA | 0.009 | 0.046 | |
| W075, 0.75X (105mm WD) | PMAG | 0.26X~2.10X | |
| FOV | 20.81mm | 2.86mm | |
| NA | 0.013 | 0.069 | |
| W150, 1.5X (51.5mm WD) | PMAG | 0.53X ~ 4.20X | |
| FOV | 11.43mm | 1.43mm | |
| NA | 0.026 | 0.138 | |
| W200, 2.0X (37.5mm WD) | PMAG | 0.70X ~ 5.60X | |
| FOV | 8.57mm | 1.07mm | |
| NA | 0.035 | 0.182 | |
| Hadallo | Marka la isticmaalayo nalka coaxial, weynayn hoose ayaa laga yaabaa in ay soo saaraan vignetting.Marka la isticmaalayo infinity ujeeddooyinka sida Auxiliary Lens Module (adapter la heli karo), PMAG, FOV iyo NA ee BS-1008 waxay ku xiran tahay xuduudaha ujeedooyinka. | ||
WD: Fogaanta Shaqada;
PMAG: Weyneynta Koowaad;
FOV: Goobta muuqaalka ee dhinaca shayga;
NA: Aperture tirooyinka;
Fiiro gaar ah: Ujeedooyinka aan dhamaadka lahayn ee la saxay ayaa xaddidaya xadka soo dhawaynta la isticmaali karo nidaamka sababtoo ah iftiinka aan sinnayn.Habka dareenka ugu badan waa 2/3 ".
Dekedo laga heli karo Dhabarka dambe ee Jirka Kamarada
Tusmada ugu hooseysa ee BS-1008D
| Interface | Sharaxaada Shaqada |
| Jiirka USB | Ku xidh mouse USB si aad si fudud ugu hawl gasho software-ka XCamView ee ku xidhan |
| HDMI | U hoggaansan heerka HDMI1.4.1080P qaab soosaar muuqaal ah oo loogu talagalay kormeeraha FHD ee caadiga ah |
| SD | U hoggaansan heerka SDIO3.0 iyo kaarka SD ayaa la gelin karaa si loogu kaydiyo muuqaal iyo muuqaal |
| DC12V | Isku xidhka adabtarada korantada (12V/1A) |
| LED | Tilmaamaha heerka LED |
BS-1008D's Camera H1080PA
Soo saarista muuqaalka
| Interface wax soo saarka Video | Sharaxaada Shaqada |
| Interface HDMI | U hoggaansan heerka HDMI1.4; 60fps@1080P |
Sawir Qaadista iyo Kaydinta Fiidiyowga ee kaadhka SD
| Magaca shaqada | Sharaxaada Shaqada |
| Kaydinta Fiidiyowga | Qaabka fiidiyowga: 2M (1920 * 1080) H264 oo lagu dhejiyay faylka MP4; Heerka kaydinta fiidiyowga: 50 ~ 60fps (la xiriira waxqabadka kaarka SD); |
| Sawir Qaadista | 2M (1920*1080) sawirka JPEG ee kaadhka SD |
| Kaydinta Cabbirka | Macluumaadka cabbiraadda oo lagu kaydiyay lakabyo kala duwan oo leh muuqaal muuqaal ah;Macluumaadka cabbiraadda waxaa la kaydiyaa iyadoo ay weheliso nuxurka sawirka oo qaab gubtay. |
Shaqada ISP
| Magaca shaqada | Sharaxaada Shaqada |
| Soo-gaadhista / Faa'iidada | Soo Bandhigista Toos ah / Gacanta |
| Balance Cad | Qaabka gacanta/Automatka ah/ROI |
| Afaysa | Taageeray |
| Diidmada 3D | Taageeray |
| Hagaajinta Dheefta | Taageeray |
| Isbeddelka Isbarbardhigga | Taageeray |
| Hagaajinta Iftiinka | Taageeray |
| Hagaajinta Gamma | Taageeray |
| 50HZ/60HZ Hawsha ka-hortagga boodhka | Taageeray |
Shaqada Sawirka
| Magaca shaqada | Sharaxaada Shaqada |
| Soo Dhawoow/Dhawyeel | Ilaa 10X |
| Muraayada/rogrog | Taageeray |
| Qabooji | Taageeray |
| Khadka ka gudba | Taageeray |
| Browser Faylasha Ku Dugan | Taageeray |
| Dib-u-ciyaarista Fiidiyowga | Taageeray |
| Shaqada Cabbirka | Taageeray |
Hawlaha kale
| Magaca shaqada | Sharaxaada Shaqada |
| Soo Celinta Dejinta Warshada | Taageeray |
| Taageero Luuqad Badan | Ingiriis / Shiinee la fududeeyay / Shiinees dhaqameed / Kuuriyaan / Thai / Faransiis / Jarmal / Jabbaan / Talyaani / Ruush |
Habka Rakibaadda ee BS-1008D
Marka laga reebo BS-1008D, waxaad u baahan tahay kaliya kormeeraha HDMI, fiilada HDMI ee la keenay, jiirka USB, kaarka SD iyo adabtarada korantada (12V/1A).Tillaabooyinka lagu bilaabayo BS-1008D waxay ku taxan yihiin sidan hoose:
BS-1008D iyo qalabkiisa
Ku xidh kamarada iyo kormeeraha HDMI adoo isticmaalaya fiilada HDMI;
Geli jiirka USB-ga ee la keenay dekedda USB ee kamarada;
Geli kaadhka SD-ga ee la keenay kaarka SD ee kamarada HDMI;
Ku xidh kamarada adabtarada korantada(12V/1A) oo shid;
Daar kormeeraha oo ka daawo muuqaalka XCamView software.Mouse-ka u dhaqaaq dhanka bidix, sare ama hoose ee XCamView UI, guddi kontorool oo kala duwan ama UI ayaa soo bixi doona isticmaalayaashuna waxay si fudud ugu shaqayn karaan jiirka.
Macluumaadka Xirmada ee BS-1008D
Macluumaadka baakad ee BS-1008D
| Liiska Baakadaha caadiga ah | ||
| A | Sanduuqa hadyada: L:17.5cm W:17.5cm H:8.5cm (1pcs, 0.85kg/sanduuqa) | |
| B | Jidhka ugu muhiimsan ee BS-1008D | |
| C | fiilada HDMI | |
| D | Adabtarada awoodda: Gelida: AC 100 ~ 240V 50Hz/60Hz, soo saarka: DC 12V 1A | Heerka Ameerika: Moodel: POWER-U-12V1A(MSA-C1000IC12.0-12W-US): UL/CE/FCCEMI heerka: FCC Qaybta 15 Qaybta B Heerka EMS: EN61000-4-2,3,4,5,6 |
| Heerka Yurub: Qaabka: AWOODDA-E-12V1A(MSA-C10001C12.0-12W-DE): UL/CE/FCEMI heerka: FCC Qaybta 15 Qaybta B Heerka EMS: EN61000-4-2,3,4,5,6 | ||
| E | Jiirka USB/USB mouse wireless | |
| Qalabka Ikhtiyaarka ah | ||
| F | Kaarka SD (16G) | |
| G | Qalabka iftiinka Coaxial | |
| H | Muraayadaha kale ee caawiya (lama tusin) | |
| I | Isha kale ee iftiinka LED (la tusay) | |
Hordhac Kooban oo ah UI kamarad BS-1008D iyo Shaqadeeda
XCamView UI
Kaamirada BS-1008D ee UI ee lagu muujiyey shaxanka soo socda waxa ka mid ah Gudigga Xakamaynta Kamarada ee bidixda daaqada fiidyaha, Toolbar cabbir oo ku yaal xagga sare ee daaqada fiidyaha iyo Toolbar Control Camera Synthesis oo ku taal hoose ee daaqada fiidyaha.
Kaamirada BS-1008D ee gacanta ku haysa UI
| Xusuusin | |
| 1 | Si aad u muujiso Koontoroolka kamarada, u dhaqaaq jiirkaaga dhanka bidix ee daaqada fiidyaha.Faahfaahinta ka eeg Sec.0 |
| 2 | U guuri cursorka jiirka xagga sare ee daaqada fiidyaha, Toolbar Cabbiraadda ayaa u soo bixi doonta si loo cabbiro iyo hawlgallada cabbirka.Marka isticmaaluhu bidix-gujiyo batoonka Float/Fixed Toolbarka Cabbirka, Toolbarka Cabbirka ayaa la hagaajin doonaa.Xaaladdan oo kale Gudida Xakamaynta Kamaradu si toos ah uma soo baxayso xataa haddii isticmaalayaashu u dhaqaaqaan cursorka jiirka dhinaca bidix ee daaqada fiidyaha.Kaliya marka isticmaalaha bidix-gujiyo badhanka ku yaal Toolbarka Cabbirka si ay uga baxaan habka cabbiraadda waxay awoodi doonaan inay ku sameeyaan hawlgallo kale oo ka mid ah Panel Control Camera, ama Qalabka Xakamaynta Kamaradaha Synthesis.Inta lagu jiro habka cabbirka, marka shay gaar ah oo cabbiraadda la doorto, Shayga Goobta & Sifooyinka Xakamaynta Bar u muuqan doona beddelka goobta iyo sifooyinka shay la doortay.Faahfaahinta eeg sec.7.3 |
| 3 | Marka isticmaalayaashu ay u dhaqaaqaan cursorka jiirka xagga hoose ee daaqadda fiidyaha, Qalabka Xakamaynta Kamaradaha Synthesis ayaa si toos ah u soo baxaya. .Faahfaahinta ka eeg Sec.0 |
Gudida Xakamaynta Kamarada ee Dhinaca Bidix ee Daaqadda Fiidiyowga
Guddiga Xakamaynta Kaamirada ayaa xakameynaya kamarada si ay u gaaraan tayada muuqaalka ama muuqaalka ugu fiican iyadoo loo eegayo codsiyada gaarka ah;Waxay si toos ah u soo baxaysaa marka cursorka mouse loo wareejiyo dhinaca bidix ee daaqada fiidyaha.Bidix-gujista
badhanka si aad u gaadho badeecooyinka Muujinta/Auto Qari ee Gudida Xakamaynta Kamarada.
| Guddiga Xakamaynta kamarada | Shaqada | Sharaxaada Shaqada |
 | Degdeg ah | Sawir qaad oo ku kaydi kaadhka SD |
| Diiwaangeli | Duub muqaal oo ku kaydi kaadhka SD | |
| Gaadhida Automatic | Marka la eego Auto Exposure, nidaamku si toos ah ayuu u hagaajin doonaa wakhtiga soo-gaadhista oo wuxuu helayaa iyadoo loo eegayo qiimaha magdhowga gaadhista | |
| Magdhawga Soo-gaadhista | La heli karo marka la eego Soo-gaadhista Automatic.U jiid bidix ama midig si aad u hagaajiso Magdhowga Soo-gaadhista iyadoo loo eegayo iftiinka fiidyaha ee hadda jira si aad u gaadho qiimaha iftiinka saxda ah | |
| Waqtiga u nuglaanshaha | La heli karo marka aan la hubin soo-gaadhista Automatic.U jiid bidix ama midig si aad u yarayso ama u kordhiso wakhtiga soo-gaadhista, adoo hagaajinaya dhalaalka fiidyaha | |
| Faa'iido | Hagaajin Faa'iidada si aad u yarayso ama u kordhiso iftiinka muuqaalka.Sawaxanka waa la dhimi doonaa ama waa la kordhin doonaa si waafaqsan | |
| Casaan | U leexo bidix ama midig si aad u yarayso ama u kordhiso saamiga casaanka ee RGB ee fiidiyowga | |
| Cagaaran | U jiid bidix ama midig si aad u yarayso ama u kordhiso saamiga Cagaaran ee RGB ee fiidiyowga | |
| Buluug | U jiid bidix ama midig si aad u yarayso ama u kordhiso saamiga Buluugga ee RGB ee fiidiyowga | |
| Balance Cad Cad | Dib u habeynta dheelitirka cad si waafaqsan fiidiyowga si joogto ah | |
| Hadhaaga Cad ee Buugga | Hagaji shayga Cas ama Buluugga si aad u dejiso muuqaalka Dheelitirka Cad. | |
| ROI Balance cad | Hadhaaga cad waxa la hagaajin karaa marka gobolka ROI la beddelo iyadoo loo eegayo waxa ku jira gudaha gobolka ROI. | |
| Afaysan | Hagaaji heerka fiiqan ee muuqaalka | |
| Diid | U leexo bidix ama midig si aad u diiddo fiidiyowga | |
| Saturation | Hagaajin heerka dheregista fiidyaha | |
| Gamma | Hagaaji heerka Gamma ee muuqaalka.U leexo dhanka midig si aad u kordhiso gamma una dhaqaaqo bidix si aad u yarayso gammaanka. | |
| Isbarbardhigga | Hagaaji heerka isbarbardhiga ee muuqaalka.U leexo dhanka midig si aad u kordhiso isbarbardhiga iyo bidix si aad u yarayso isbarbardhiga. | |
| DC | Iftiinka DC-ga, ma jiri doono isbedbeddel ku yimaadda isha iftiinka sidaa darteed looma baahna magdhow liidata iftiinka | |
| AC(50HZ) | Hubi AC(50HZ) si aad u baabi'iso liidashada ay keento ilayska 50Hz | |
| AC(60HZ) | Hubi AC(60HZ) si aad meesha uga saarto liidashada ay keento ilayska 60Hz | |
| Asal ahaan | Ku soo celi dhammaan jaangooyooyinka ku jira Gudigga Xakamaynta kamarada si ay u qiimeeyaan asalka |
Qalabka Cabbirka ee ku yaal xagga sare ee Daaqadda Fiidiyowga
Qalabka Cabbiraadda ayaa soo bixi doona marka aad u dhaqaajinayso cursorka jiirka meel kasta oo u dhow cidhifka sare ee daaqada fiidyaha.Halkan waxaa ah hordhaca hawlaha kala duwan ee ku yaala Toolbarka Cabbirka:
Qalabka cabbiraadda ee dhinaca sare ee daaqadda fiidiyowga
| Astaan | Shaqada |
 | Sabbeyn/ Hagaajin beddelka Toolbarka Cabbirka |
 | Muuji / Qari Shayada Cabirka |
 | Dooro Cutubka Cabbirka ee la rabo |
 | Dooro Weynaynta Cabbiraadda Qalinjabinta ka dib |
 | Xulashada Shayga |
 | Xagasha |
 | Xagalka 4 dhibcood |
 | Tilmaam |
 | Khadka Gardarada ah |
 | 3 dhibcood |
 | Horizontal Line |
 | Khadka Toosan |
 | 3 dhibcood oo toosan |
 | Barbar socda |
 | leydi |
 | Ellipse |
 | 5 dhibcood Ellipse |
 | Goobaabin |
 | 3 dhibcood Goobaabin |
 | Annulus |
 | Laba Goobo iyo Masaafada Xarunta |
 | 3 Qodob Labada Goobo iyo Masaafada Xarunta |
 | Arc |
 | Qoraal |
 | geeso badan |
 | Qallooca |
 | Baarka Miisaanka |
 | Falaadh |
 | Samee Calibration si loo go'aamiyo xidhiidhka u dhigma ee ka dhexeeya weynaynta iyo xallinta, kaas oo dhisi doona xidhiidhka u dhigma ee u dhexeeya unugga cabbiraadda iyo cabbirka pixel-ka dareemayaasha.Qalabaynta ayaa loo baahan yahay in lagu sameeyo caawinta mikrometer.Si aad u hesho tillaabooyinka faahfaahsan ee fulinta Calibration fadlan tixraac buug-gacmeedka caawinta ToupView. |
 | U dhoofi macluumaadka cabbirka faylka CSV(*.csv) |
 | Dejinta Cabbirka |
 | Tirtir dhammaan walxaha cabbiraadda |
 | Ka bax qaabka cabbirka |
| | Marka cabbirku dhammaado, ku dhufo bidix-guji hal shay oo cabbiraadda waxaana soo muuqan doona Shayga Goobta & Qalabka Xakamaynta.Isticmaaluhu wuxuu dhaqaajin karaa shayga isagoo ku jiidaya shayga jiirka.Laakiin dhaqdhaqaaq sax ah ayaa lagu samayn karaa barta kontoroolka.Astaamaha ku yaal baarka kantaroolku waxa ay ka dhigan yihiin Bidix u dhaqaaq, Midig u dhaqaaq, Kor u dhaqaaq, Hoos u dhaqaaq, Midabaynta iyo Tirtir. |
Fiiro gaar ah:
1) Marka isticmaalaha bidix-guji badhanka Muujinta/Qari
Toolbarka Cabbirka, Toolbarka Cabbirka ayaa la hagaajin doonaa.Xaaladdan oo kale Gudigga Xakamaynta Kamaradu si toos ah uma soo baxayso xitaa haddii cursorka jiirka loo raro cidhifka bidix ee daaqada fiidyaha.Kaliya marka isticmaalaha bidix-gujibadhanka ku yaal Toolbarka Cabbirka si ay uga baxaan habka cabbiraadda waxay awood u yeelan doonaan inay hawlo kale ku sameeyaan Panel Control Camera ama Qalabka Xakamaynta Kamaradaha Synthesis.
2) Marka Shay Cabbireed gaar ah la doorto inta lagu guda jiro habka cabbirka, Goobta Walaxda & Baarista Sifooyinkau muuqan doona beddelka goobta shayga iyo sifooyinka walxaha la doortay.
Astaamaha iyo Hawlaha Qalabka Xakamaynta Kaamirada Synthesis ee gunta hoose ee Daaqadda Fiidiyowga
| Astaan | Shaqada | Astaan | Shaqada |
 | Ku Soo Dhawoow Daaqadda Muqaalka |  | Ka Deji Daaqada Muqaalka |
 | Jidka toosan |  | Duubista Toosan |
 | Midabka/Cawlan |  | Fiidiyowga Qabo |
 | Muuji Line Cross |  | Ka dhex baadh sawirada iyo fiidyowyada kaadhka SD |
  | Dejinta |  | Hubi nooca XCamView |
Thedejinta ayaa ilaa xad ka dhib badan hawlaha kale.Halkan waxaa ah macluumaad dheeraad ah oo ku saabsan:
Dejinta>Cabirka
Habaynta cabbirka
| Caalamka | Saxnaanta | Loo isticmaalo in lagu dejiyo tirada lambarrada ka dib barta tobanlaha ee natiijada cabbirka |
| Calibration | Balaadhka laynka | Loo isticmaalo qeexida ballaca xadhkaha si loo cabbiro; |
| Midabka | Loo isticmaalo in lagu qeexo midabka xadhkaha si loo cabbiro; | |
| Endpoint | Nooca: Waxaa loo isticmaalaa qeexida qaabka dhibcaha dhamaadka xariiqyada si loo cabbiro: Null macnaheedu waa ma jiro EndPoints, leydi macnaheedu waa leydi nooca dhamaadka.Waxay ka dhigaysaa toosinta si fudud; | |
| Barta, xagal, xariiqda, xariiqda toosan, xariiqda toosan, leydi, goobaabin, Ellipse, Annulus, laba goobaabin, geeso, qalooc | ||
| Bidix ku dhufo oo ay la socoto amarka Cabbirka ee kor lagu soo sheegay ayaa daah-furi doona habaynta sifada u dhiganta si loo dejiyo hantida gaarka ah ee Walxaha Qiyaasta. | ||
Dejinta> Weynaynta
Bogga dejinta cabbirka weyneynta oo dhammaystiran
| Magaca | Magaca weyneynta, sida caadiga ah weyneynta ujeeddada mikroskoobku waxaa loo adeegsadaa magaca weyneynta marka la cabbirayo, sida 4X, 10X, 100X, iwm tusaale ahaan, nooca mikroskoob, magaca hawlwadeenka, iwm. |
| Qaraarka | Pixels halkii mitir.Qalabka sawirka sida mikroskoobyadu waxay leeyihiin qiime xallin sare; |
| Nadiifi Dhammaan | Guji badhanka Nadiifi Dhammaan waxay nadiifin doontaa weynaynta la cabbiray; |
| Tirtir | Guji Delete si aad u tirtirto weyneynta la doortay; |
Settings>Qaabka Sawirka
Bogga dejinta qaabka sawirka oo dhammaystiran
| Habka Badbaadinta Shayga Qiyaasta | Ku Gub Qaabka: Walxaha cabbiraadda waxay ku milmeen sawirka hadda jira.Isticmaaluhu ma tafatirin karo walxaha cabbiraadda.Habkani maaha mid dib loo celin karo. Habka Lakabay: Walxaha cabbiraadda waxa lagu kaydiyaa lakabyo kala duwan oo leh xogta hadda jirta ee faylka bartilmaameedka ah.Isticmaaluhu wuxuu wax ka beddeli karaa walxaha cabbiraadda ee ku jira faylka bartilmaameedka isagoo wata software-ka PC-ga.Habkani waa la rogi karaa |
Settings>Video
Dejinta dhamaystiran ee habaynta fiidyowga bogga dib-u-ciyaarista
Dejinta dhamaystiran ee habaynta fiidyowga bogga-video encode
| Hordhac Dhakhso/Dib u Celis ah | Muddada u dhexaysa dib-u-ciyaarista faylasha fiidiyowga. |
| Video Encode | H264: Qaabka codaynta ee faylasha muuqaalku waa qaabka H264. H265: Qaabka codaynta ee faylasha muuqaalku waa qaabka H265. |
Dejinta> Kaydinta
Dejinta dhamaystiran ee bogga dejinta kaadhka SD
| Qalabka Kaydinta | Kaarka SD: Kaarka SD waxa kaliya oo loo taageeraa sida qalabka kaydinta. |
| Qaabka Nidaamka Faylka ee Qalabka Kaydinta | Qor qaabka nidaamka faylka ee qalabka kaydinta hadda FAT32: Nidaamka faylka ee kaarka SD waa FAT32.Cabbirka ugu badan ee faylka fiidiyowga ee hal fayl waa 4G Bytes; exFAT: Nidaamka faylka ee kaarka SD waa exFAT.Cabbirka ugu badan ee faylka fiidiyowga ee hal fayl waa 4G Bytes; NTFS: Nidaamka faylka ee kaarka SD waa NTFS.Cabbirka ugu badan ee faylka fiidiyowga ee hal fayl waa 4G Bytes.Isticmaal PC si aad u qaabayso kaararka SD oo aad u kala beddesho FAT32, exFAT iyo NTFS. Xaaladda Aan La Aqoon: Kaarka SD lama helin ama nidaamka faylka lama aqoonsan; |
Dejinta>Faylasha
Dejinta dhamaystiran ee bogga dejinta faylasha
| Magaca faylka sawirka | Si Toos ah: Faylasha sawirka si toos ah ayaa loogu kaydin doonaa horgalaha la cayimay. Buugga: Isticmaalayaashu waa inay sheegaan magaca faylka kahor kaydinta sawirka. |
| Magaca Faylka Fiidiyowga | Si Toos ah: Faylka fiidyaha waxa si toos ah loogu kaydin doonaa horgalaha la cayimay. Buugga: Isticmaalayaashu waa inay sheegaan magaca faylka fiidiyowga ka hor duubista fiidiyowga. |
| Fiiro gaar ah: | Cabbirka ugu badan ee faylka fiidiyowga waa 4G Bytes.Faylal fiidiyoowyo badan ayaa si toos ah loo soo saari karaa inta lagu jiro duubis muqaal waqti dheer ah. |
Dejinta>Luqadda
Dejinta dhamaystiran ee xulashada luqadda bogga dejinta
| Ingiriis | Deji luqadda software-ka oo dhan Ingiriisi; |
| Shiinees la fududeeyay | U deji luqadda software-ka oo dhan oo u dhig Shiinaha la fududeeyay; |
| Shiinees dhaqameed | U deji luqadda softiweerka oo dhan Shiinaha dhaqameed; |
| Kuuriyaan | Deji luqadda software-ka oo dhan oo u dhig Kuuriya; |
| Thailand | Deji luqadda software-ka oo dhan gudaha Thailand; |
| Faransiis | U deji luqadda software-ka oo dhan Faransiis |
| Jarmal | U deji luqadda software-ka oo dhan Jarmal |
| Jabbaan | U deji luqadda software-ka oo dhan una dhig Jabbaan |
| Talyaani | U deji luqadda software-ka oo dhan una dhig Talyaani |
| Ruush | U deji luqadda software-ka oo dhan oo u dhig Ruush |
Dejinta>Qalab kala duwan
Bogga dejinta kala duwan oo dhammaystiran
| Gaadhida Automatic | Wakhtiga gaadhista ugu badan inta lagu jiro habka gaadhista gaadhiga waa la cayimi karaa.Dejinta shaygan qiimo hoose waxa ay dammaanad qaadi kartaa heerka jir ee degdega ah inta lagu jiro gaadhista baabuurta. |
| Midabka ROI | Doorashada midabka xariiqda leydiga ee ROI |
| Soo dejinta Halbeegyada kamaradaha | Ka soo deji cabirka kamarada kaadhka SD si aad u isticmaasho cabirka kamarada hore loo dhoofiyay |
| Dhoofinta Halbeegyada kamaradaha | U Dhoofi Halbeegyada Kamarada Kaarka SD si aad u isticmaasho Halbeegyada kamaradaha ee hore loo dhoofiyay |
| Dib ugu habbee khaladaadka warshadda | Ku soo celi cabbirada kamarada heerka warshadeeda; |
Tusaalaha Sawirada
array LCD ah oo lagu qabtay BS-1008D
Guddi wareeg ah oo lagu qabtay BS-1008D
Shahaado
Saadka
